Menu

Tylox® 3SPW Connector

Push-fit connectors for concrete structures - Designed to provide a watertight seal between a concrete structure and a connecting pipe, the Tylox® 3SPW connectors offer an economical, simple alternate to the traditional “boot” style connector.

Engineered to meet ASTM C923 performance requirements - 13 psig watertight sealing in straight alignment and 10 psig water-tight sealing at 7° axial deflection - Tylox™ 3SPW connectors are suitable for use wherever an SDR35 PVC connecting pipe is required to join to a concrete structure.

The Tylox™ 3SPW connectors utilize  a 3-step, cored (or formed) hole in the structure. The dimensions of the cored hole are engineered to approximate the bell dimensions for the appropriate size of PVC pipe, and a water-tight connection is accomplished simply by inserting the pipe spigot into the structure, in the same manner as you would insert it into the PVC pipe-bell.

Designed for use with 4” (100mm) through 24” (600mm) SDR35 PVC connecting pipes, the 3SPW Series provides a rugged connector for use on larger size pipes, and does not require gluing into the step location. 

3S_PW.jpg

Materials and Identification

Tylox™ 3SPW connectors are manufactured from synthetic rubber compounds, to meet the material requirements of ASTM C923.

Connectors are available for “Standard” or “Oil-resistant” applications. Oil-resistant connectors will have an orange dot on the rubber molding, or an orange line around the periphery of the gasket.

Other materials and specifications may be available as custom order. Please consult your Hamilton Kent representative regarding your specific requirement.

Pressure Rating

Tylox® 3SPW connector are designed to provide water-tight connections in excess of ASTM C923 requirements - 13 psig water-tight sealing in straight alignment and 10 psig watertight sealing at 7o axial deflection.

MSDS

Tylox® 3SPW connectors are not WHIMIS listed.

Tylox® 3SPW connectors are made from crosslinked, polymeric rubber, which is not considered a health hazard. As with any rubber product, the connector may smolder or burn when exposed to a naked flame. Fire-fighters should wear self-contained, positive-pressure, or pressure-demand, breathing apparatus; and utilize water-spray, air-foam, dry chemical or CO2-type extinguishing media.

Storage and Handling

Proper care of the connector prior to installation will ensure maximum ease of installation and maximum sealing properties of the connector. Connectors must not be stored near any electrical equipment that produces ozone. All connectors must be protected from harmful substance such as dirt, mud, dust and grit. All connectors, other than oil-resistant connectors, must be protected from contact with solvents and petroleum based greases and oils.

Installation

Detailed installation instructions can be found in the literature .pdf file in the "Related Resources" section of this page.

Product Benefits

  •  Meets ASTM C923 specifications
  •  Suitable for 4” thru 24” , SDR35 PVC connecting pipes
  •  Standard and Oil-Resistant versions available
Solve Infiltration Problems Caused By Traditional Manhole...
Sanitary

Find out how to eliminate inflow and infiltration through manhole covers and frames, how to increase connection capacity and save money by not conveying and treating unnecessary water.

Installing A Lifespan® System
LS-074

You and your team have done manhole installations in the past. But they have been tough and tedious. How is a Lifespan® installation different? Watch and see!