Menu

Tylox® ST Connectors

Cast-in stormwater sewer pipe-to-manhole connectors.... flexible enough to meet your most rigid standards. Engineered to accommodate differential settlement, the polymer construction of the Tylox® ST flexible connector profile allows for soil-tight connections in excess of 6 psig (41 kPa) watertight sealing in straight alignment.

GG_Strm_Wka_CS_STWT.jpg

By providing a soil-tight joint, Tylox® ST flexible connectors save you operating time and money by:

  •  Reducing the potential for environmental hazards and clean-up due to ex-filtration
  •  Reducing the chances for ground-water contamination due to ex-filtration
  •  Reducing “clean-outs” of soil ingress due to infiltration
  •  Reducing downstream, wastewater processing capacity requirements due to infiltration

Manufactured to suit pipe sizes 12” to 48”, Tylox® ST flexible connectors can accommodate many different varieties of connecting pipe materials:

  •  Steel
  •  Ductile Iron
  •  PVC
  •  Clay
  •  Concrete 

 Some description

Size Selection

Please refer to the Selection Guide located in the Download section of this web page.

Mandrels

Mandrels are available for either round-wall or flat-wall structures. For selection and ordering information, please refer to the Selection Guide located in the Download section of this web page.

 Strm_Wka_CS_STWT_SG8.jpg

Materials and Identification

Tylox™ ST connectors are manufactured from synthetic rubber compounds, to meet the material requirements of ASTM C923 and BNQ 2622-240.

Connectors are available for “Standard” or “Oil-resistant” applications. Molded, oil-resistant connectors will have an orange dot on the rubber molding. Extruded, oil-resistant connectors will have an orange line around the periphery of the connector.

Other materials and specifications may be available as custom order. Please consult your Hamilton Kent representative regarding your specific requirement.

GG_Strm_WKa_CS.JPG

Pressure Rating

Tylox® ST cast-in connectors are designed for soil-tight connections in excess of ASTM C923 and BNQ 2622-240 requirements - 6 psig (41 kPa) watertight sealing in straight alignment.

SDS

Tylox® ST cast-in connectors are not WHIMIS listed.

Tylox® ST cast-in connectors are made from cross-linked, polymeric rubber, which is not considered a health hazard. As with any rubber product, the connector may smolder or burn when exposed to a naked flame. Fire-fighters should wear self-contained, positive-pressure, or pressure-demand, breathing apparatus; and utilize water-spray, air-foam, dry chemical or CO2-type extinguishing media.

Storage and Handling

Proper care of the connector prior to installation will ensure maximum ease of installation and maximum sealing properties of the connector.

Connectors must not be stored near any electrical equipment that produces ozone.

All connectors must be protected from harmful substance such as dirt, mud, dust and grit.

All connectors, other than oil-resistant connectors, must be protected from contact with solvents and petroleum based greases and oils.

Installation

Detailed installation instructions can be found in the “.pdf” file in the "Related Resources" section of this page.

Product Benefits

  •  Meets ASTM C923 and BNQ 2622-420 specifications
  •  Smooth, High-Strength splicing
  •  Suitable for all types and sizes of connecting pipes
  •  Standard and Oil-Resistant versions available
  •  Saves construction time and money due to:
    •  simple “push-fit” connection
    •  no special tools or equipment
    •  immediate back-fill
Solve Infiltration Problems Caused By Traditional Manhole...
Sanitary

Find out how to eliminate inflow and infiltration through manhole covers and frames, how to increase connection capacity and save money by not conveying and treating unnecessary water.

What To Expect From Your Supplier
Storm_Box

Watch this short webinar to find out how you can get the most from your relationship with your watertight infrastructure supplier.